Reactor equipment leakageand other major causes of fire often originated in the design stage, so do agood job in the design phase of fire prevention work is very important. First,the design, type selection, material selection, installation and installationof the reactor should be in accordance with national standards and standards.Strictly control the design, according to the characteristics of differentprocesses, selection of appropriate resistance to high or low temperature,corrosion resistance, to meet the pressure requirement of material, adoption ofadvanced technology for manufacture and installation, do a good job strictinspection of fire prevention work, and through the strict test and acceptance.
To the chemical industry'semployees to be relatively stable, to strengthen the process of workers andoperational discipline, to develop and strictly enforce the rules of operation.Improve the level of staff's professional quality and production operationskills. Formulate contingency plans, conduct drills to improve the emergencyresponse capacity of workers.
Theimplementation of preventive measures for hot work
1,remove the take off. Where possible, the ban in the fire area to flare toremove take away from the equipment, pipeline and its accessories, removed fromthe body, move to a safe place to flare up, after the hot work and put back inplace.
2,isolation cover. Will flare up of the equipment, pipeline and its accessoriesand related operating system for effective isolation, as in pipes and pluggingblind plate, sealing head or tear down a pipe section method, the isolation offlammable and explosive materials and medium gas into the hot work point.
3,clean up the scene. Hot work to clean up the site before, this is the mostbasic requirements. The flammable and explosive goods transferred to a safeplace of hot points around the site should be cleaned before the fire.
4,check and confirm. Be ready to work, be sure to check the confirmation, this isvery important. After inspection to confirm correct, issued safety operationcertificate ", if you enter the reactor operation(www.fanyingfuw.com), but also issued"equipment safety operation certificate ", the implementation ofsupervisory responsibility.